的芯体由典型的板翅式铝合金真空钎焊而成，设计压力20公斤力，耐压测试35公斤力（3.5MPa）。 1, HD18140T. The core of this air cooler
is vacuum brazed by a typical plate-fin aluminum alloy. The design pressure is 20 kgf and the pressure test is 35 kgf (3.5 MPa).
2, especially for applications: gear oil, equipment lubricants and other special fluid lubricant cooling.
It is also suitable for fluids such as liquid oil and mineral oil that complies with DlN51524.
3, cold city fan configuration: standard configuration is IP55 or higher explosion-proof motor, integrated high-flow axial flow fan. Class F insulation level, CE certification mark.
If required, DC24 / 12V DC fan can be equipped.
There are two cooling methods: blower and suction.
最大散热功率可达45kw。 4, the maximum cooling power of this air cooler
can reach 45kw. Example: Ambient temperature is 30 ℃, oil inlet temperature is 90 ℃, flow rate is 270L / min.
For example, the lubricating oil of general large speed reducer, the working environment is 35 ~ 40 ℃, when the imported oil temperature is 90 ℃, the main motor power of the equipment is less than 90kw, this air cooler can be used preferentially.
5. The structure size is optimized and designed, compact and simple, easy to install and maintain. The cooling area of the oil duct is 10 square meters, and the cooling area of the air channel is 17.9 square meters.
6. When the flow rate is 270L / min, the pressure drop is 0.15 bar, which is 1.5 kgf.
之散热器质保2年，风机质保18个月。 7, the radiator cooler warranty for 2 years, the fan warranty for 18 months.